dmesg - AMD FX-8120 Eight-Core
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-32-generic (buildd@kissel) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #57-Ubuntu SMP Tue Jul 15 03:51:08 UTC 2014 (Ubuntu 3.13.0-32.57-generic 3.13.11.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000907ff] usable
BIOS-e820: [mem 0x0000000000090800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000cf71ffff] usable
BIOS-e820: [mem 0x00000000cfe80000-0x00000000cfe97fff] ACPI data
BIOS-e820: [mem 0x00000000cfe98000-0x00000000cfebffff] ACPI NVS
BIOS-e820: [mem 0x00000000cfec0000-0x00000000cfefffff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011effffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: System manufacturer System Product Name/M5A78L-M LX PLUS, BIOS 1501 04/27/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x11f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000000 mask FFFF80000000 write-back
1 base 000080000000 mask FFFFC0000000 write-back
2 base 0000C0000000 mask FFFFF0000000 write-back
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
TOM2: 000000012f000000 aka 4848M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: update [mem 0xd0000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xcf720 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008a000] 8a000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fdf000, 0x01fdffff] PGTABLE
BRK [0x01fe0000, 0x01fe0fff] PGTABLE
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
init_memory_mapping: [mem 0x11ee00000-0x11effffff]
[mem 0x11ee00000-0x11effffff] page 2M
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
init_memory_mapping: [mem 0x11c000000-0x11edfffff]
[mem 0x11c000000-0x11edfffff] page 2M
init_memory_mapping: [mem 0x100000000-0x11bffffff]
[mem 0x100000000-0x11bffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xcf71ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x3fffffff] page 2M
[mem 0x40000000-0xbfffffff] page 1G
[mem 0xc0000000-0xcf5fffff] page 2M
[mem 0xcf600000-0xcf71ffff] page 4k
RAMDISK: [mem 0x7ec35000-0x7fffefff]
ACPI: RSDP 00000000000fb490 000024 (v02 ACPIAM)
ACPI: XSDT 00000000cfe80100 000054 (v01 042713 XSDT1042 20130427 MSFT 00000097)
ACPI: FACP 00000000cfe80290 0000F4 (v03 042713 FACP1042 20130427 MSFT 00000097)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20131115/tbfadt-603)
ACPI: DSDT 00000000cfe80460 00D9EE (v01 A1969 A1969001 00000001 INTL 20060113)
ACPI: FACS 00000000cfe98000 000040
ACPI: APIC 00000000cfe80390 00008C (v01 042713 APIC1042 20130427 MSFT 00000097)
ACPI: MCFG 00000000cfe80420 00003C (v01 042713 OEMMCFG 20130427 MSFT 00000097)
ACPI: OEMB 00000000cfe98040 000072 (v01 042713 OEMB1042 20130427 MSFT 00000097)
ACPI: HPET 00000000cfe8f460 000038 (v01 042713 OEMHPET 20130427 MSFT 00000097)
ACPI: SSDT 00000000cfe8f4a0 001714 (v01 A M I POWERNOW 00000001 AMD 00000001)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011effffff]
Initmem setup node 0 [mem 0x00000000-0x11effffff]
NODE_DATA [mem 0x11eff9000-0x11effdfff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011aa00000-ffff88011e5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x11effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0008ffff]
node 0: [mem 0x00100000-0xcf71ffff]
node 0: [mem 0x100000000-0x11effffff]
On node 0 totalpages: 976559
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3983 pages, LIFO batch:0
DMA32 zone: 13213 pages used for memmap
DMA32 zone: 845600 pages, LIFO batch:31
Normal zone: 1984 pages used for memmap
Normal zone: 126976 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled)
ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 24, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8300 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00090000-0x00090fff]
PM: Registered nosave memory: [mem 0x00091000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xcf720000-0xcfe7ffff]
PM: Registered nosave memory: [mem 0xcfe80000-0xcfe97fff]
PM: Registered nosave memory: [mem 0xcfe98000-0xcfebffff]
PM: Registered nosave memory: [mem 0xcfec0000-0xcfefffff]
PM: Registered nosave memory: [mem 0xcff00000-0xffdfffff]
PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
e820: [mem 0xcff00000-0xffdfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88011ec00000 s86336 r8192 d24256 u262144
pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 961277
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Node 0: aperture @ 0 size 32 MB
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ c4000000
PM: Registered nosave memory: [mem 0xc4000000-0xc7ffffff]
Memory: 3675380K/3906236K available (7363K kernel code, 1142K rwdata, 3400K rodata, 1336K init, 1440K bss, 230856K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 15728640 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 3113.903 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6227.80 BogoMIPS (lpj=12455612)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
tseg: 0000000000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
LVT offset 1 assigned for vector 0xf9
Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28495 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD FX(tm)-8120 Eight-Core Processor (fam: 15, model: 01, stepping: 02)
Performance Events: Fam15h core perfctr, AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 6
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000003f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
x86: Booted up 1 node, 8 CPUs
smpboot: Total of 8 processors activated (49822.44 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xcfe98000-0xcfebffff] (163840 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 14:18:05, date: 10/08/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 3 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
pci 0000:00:00.0: [1022:9600] type 00 class 0x060000
pci 0000:00:01.0: [1043:9602] type 01 class 0x060400
pci 0000:00:04.0: [1022:9604] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:11.0: [1002:4392] type 00 class 0x010400
pci 0000:00:11.0: reg 0x10: [io 0xb000-0xb007]
pci 0000:00:11.0: reg 0x14: [io 0xa000-0xa003]
pci 0000:00:11.0: reg 0x18: [io 0x9000-0x9007]
pci 0000:00:11.0: reg 0x1c: [io 0x8000-0x8003]
pci 0000:00:11.0: reg 0x20: [io 0x7000-0x700f]
pci 0000:00:11.0: reg 0x24: [mem 0xfe8ffc00-0xfe8fffff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 0x10: [mem 0xfe8fe000-0xfe8fefff]
pci 0000:00:12.0: System wakeup disabled by ACPI
pci 0000:00:12.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:12.1: reg 0x10: [mem 0xfe8fd000-0xfe8fdfff]
pci 0000:00:12.1: System wakeup disabled by ACPI
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 0x10: [mem 0xfe8ff800-0xfe8ff8ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:12.2: System wakeup disabled by ACPI
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 0x10: [mem 0xfe8fc000-0xfe8fcfff]
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.1: [1002:4398] type 00 class 0x0c0310
pci 0000:00:13.1: reg 0x10: [mem 0xfe8f7000-0xfe8f7fff]
pci 0000:00:13.1: System wakeup disabled by ACPI
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 0x10: [mem 0xfe8ff400-0xfe8ff4ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.1: [1002:439c] type 00 class 0x01018a
pci 0000:00:14.1: reg 0x10: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x14: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x18: [io 0x0000-0x0007]
pci 0000:00:14.1: reg 0x1c: [io 0x0000-0x0003]
pci 0000:00:14.1: reg 0x20: [io 0xff00-0xff0f]
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 0x10: [mem 0xfe8f0000-0xfe8f3fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.2: System wakeup disabled by ACPI
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.4: System wakeup disabled by ACPI
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 0x10: [mem 0xfe8f6000-0xfe8f6fff]
pci 0000:00:14.5: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
pci 0000:01:05.0: [1002:9616] type 00 class 0x030000
pci 0000:01:05.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
pci 0000:01:05.0: reg 0x14: [io 0xc000-0xc0ff]
pci 0000:01:05.0: reg 0x18: [mem 0xfeae0000-0xfeaeffff]
pci 0000:01:05.0: reg 0x24: [mem 0xfe900000-0xfe9fffff]
pci 0000:01:05.0: supports D1 D2
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff]
pci 0000:02:00.0: reg 0x18: [mem 0xfdfff000-0xfdffffff 64bit pref]
pci 0000:02:00.0: reg 0x20: [mem 0xfdff8000-0xfdffbfff 64bit pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:03:05.0: [1106:3044] type 00 class 0x0c0010
pci 0000:03:05.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
pci 0000:03:05.0: reg 0x14: [io 0xec00-0xec7f]
pci 0000:03:05.0: PME# supported from D3hot
pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xcff00000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:01:05.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00090800-0x0009ffff]
e820: reserve RAM buffer [mem 0xcf720000-0xcfffffff]
e820: reserve RAM buffer [mem 0x11f000000-0x11fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
hpet0: 4 comparators, 32-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:05: [dma 0 disabled]
pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:07: [dma 0 disabled]
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: [io 0x040b] has been reserved
system 00:09: [io 0x04d6] has been reserved
system 00:09: [io 0x0c00-0x0c01] has been reserved
system 00:09: [io 0x0c14] has been reserved
system 00:09: [io 0x0c50-0x0c51] has been reserved
system 00:09: [io 0x0c52] has been reserved
system 00:09: [io 0x0c6c] has been reserved
system 00:09: [io 0x0c6f] has been reserved
system 00:09: [io 0x0cd0-0x0cd1] has been reserved
system 00:09: [io 0x0cd2-0x0cd3] has been reserved
system 00:09: [io 0x0cd4-0x0cd5] has been reserved
system 00:09: [io 0x0cd6-0x0cd7] has been reserved
system 00:09: [io 0x0cd8-0x0cdf] has been reserved
system 00:09: [io 0x0b00-0x0b3f] has been reserved
system 00:09: [io 0x0800-0x089f] could not be reserved
system 00:09: [io 0x0b00-0x0b0f] has been reserved
system 00:09: [io 0x0b20-0x0b3f] has been reserved
system 00:09: [io 0x0900-0x090f] has been reserved
system 00:09: [io 0x0910-0x091f] has been reserved
system 00:09: [io 0xfe00-0xfefe] has been reserved
system 00:09: [mem 0xcff00000-0xcfffffff] has been reserved
system 00:09: [mem 0xffb80000-0xffbfffff] has been reserved
system 00:09: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:09: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [io 0x0230-0x023f] has been reserved
system 00:0a: [io 0x0290-0x029f] has been reserved
system 00:0a: [io 0x0300-0x030f] has been reserved
system 00:0a: [io 0x0a30-0x0a3f] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:0c: [mem 0x00100000-0xcfefffff] could not be reserved
system 00:0c: [mem 0xfec00000-0xffffffff] could not be reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 13 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
pci 0000:00:01.0: bridge window [mem 0xfe900000-0xfeafffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
pci 0000:00:04.0: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref]
pci 0000:00:14.4: PCI bridge to [bus 03]
pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:01: resource 1 [mem 0xfe900000-0xfeafffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:02: resource 2 [mem 0xfdf00000-0xfdffffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:03: resource 8 [mem 0xcff00000-0xdfffffff]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled
pci 0000:01:05.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20264K (ffff88007ec35000 - ffff88007ffff000)
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ c4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
perf: AMD NB counters detected
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
microcode: CPU0: patch_level=0x06000629
microcode: CPU1: patch_level=0x06000629
microcode: CPU2: patch_level=0x06000629
microcode: CPU3: patch_level=0x06000629
microcode: CPU4: patch_level=0x06000629
microcode: CPU5: patch_level=0x06000629
microcode: CPU6: patch_level=0x06000629
microcode: CPU7: patch_level=0x06000629
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1412777889.612:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 7346
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:12.2: EHCI Host Controller
ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:12.2: debug port 1
ehci-pci 0000:00:12.2: irq 17, io mem 0xfe8ff800
ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:12.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:13.2: EHCI Host Controller
ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci-pci 0000:00:13.2: debug port 1
ehci-pci 0000:00:13.2: irq 19, io mem 0xfe8ff400
ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-32-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:13.2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:12.0: OHCI PCI host controller
ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
ohci-pci 0000:00:12.0: irq 16, io mem 0xfe8fe000
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI PCI host controller
usb usb3: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb3: SerialNumber: 0000:00:12.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
ohci-pci 0000:00:12.1: OHCI PCI host controller
ohci-pci 0000:00:12.1: new USB bus registered, assigned bus number 4
ohci-pci 0000:00:12.1: irq 16, io mem 0xfe8fd000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: OHCI PCI host controller
usb usb4: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb4: SerialNumber: 0000:00:12.1
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 3 ports detected
ohci-pci 0000:00:13.0: OHCI PCI host controller
ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5
ohci-pci 0000:00:13.0: irq 18, io mem 0xfe8fc000
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: OHCI PCI host controller
usb usb5: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb5: SerialNumber: 0000:00:13.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 3 ports detected
ohci-pci 0000:00:13.1: OHCI PCI host controller
ohci-pci 0000:00:13.1: new USB bus registered, assigned bus number 6
ohci-pci 0000:00:13.1: irq 18, io mem 0xfe8f7000
usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: OHCI PCI host controller
usb usb6: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb6: SerialNumber: 0000:00:13.1
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 3 ports detected
ohci-pci 0000:00:14.5: OHCI PCI host controller
ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 7
ohci-pci 0000:00:14.5: irq 18, io mem 0xfe8f6000
usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb7: Product: OHCI PCI host controller
usb usb7: Manufacturer: Linux 3.13.0-32-generic ohci_hcd
usb usb7: SerialNumber: 0000:00:14.5
usb 1-1: new high-speed USB device number 2 using ehci-pci
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 5e3c0f9ca6e36543535fa2bb5b709e84f16da7c7'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:381:333
tty tty54: hash matches
rtc_cmos 00:02: setting system clock to 2014-10-08 14:18:10 UTC (1412777890)
acpi-cpufreq: overriding BIOS provided _PSD data
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
Freeing unused kernel memory: 696K (ffff880001b52000 - ffff880001c00000)
systemd-udevd[148]: starting version 204
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
ahci 0000:00:11.0: version 3.0
r8169 0000:02:00.0: irq 41 for MSI/MSI-X
ahci 0000:00:11.0: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl RAID mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
r8169 0000:02:00.0 eth0: RTL8168f/8111f at 0xffffc90000642000, 50:46:5d:69:6e:e2, XID 08000800 IRQ 41
r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd00 irq 22
ata2: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffd80 irq 22
ata3: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe00 irq 22
ata4: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8ffe80 irq 22
ata5: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff00 irq 22
ata6: SATA max UDMA/133 abar m1024@0xfe8ffc00 port 0xfe8fff80 irq 22
scsi6 : pata_atiixp
scsi7 : pata_atiixp
ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[drm] radeon kernel modesetting enabled.
[drm] initializing kernel modesetting (RS780 0x1002:0x9616 0x1043:0x8388).
[drm] register mmio base: 0xFEAE0000
[drm] register mmio size: 65536
ATOM BIOS: B27732
radeon 0000:01:05.0: VRAM: 256M 0x00000000C0000000 - 0x00000000CFFFFFFF (256M used)
radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF
[drm] Detected VRAM RAM=256M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 1882238 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 256M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Loading RS780 Microcode
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
radeon 0000:01:05.0: WB enabled
radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff8800cf3e3c00
radeon 0000:01:05.0: fence driver on ring 3 use gpu addr 0x00000000a0000c0c and cpu addr 0xffff8800cf3e3c0c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] radeon: irq initialized.
firewire_ohci 0000:03:05.0: added OHCI v1.0 device as card 0, 4 IR + 8 IT contexts, quirks 0x41
[drm] ring test on 0 succeeded in 1 usecs
[drm] ring test on 3 succeeded in 1 usecs
[drm] Enabling audio 0 support
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] VGA-1
[drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c
[drm] Encoders:
[drm] DFP3: INTERNAL_KLDSCP_LVTMA
[drm] radeon: power management initialized
usb 1-1: New USB device found, idVendor=054c, idProduct=02a5
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Storage Media
usb 1-1: Manufacturer: Sony
usb 1-1: SerialNumber: 9B3001406300016610
[drm] fb mappable at 0xD0141000
[drm] vram apper at 0xD0000000
[drm] size 4325376
[drm] fb depth is 24
[drm] pitch is 5632
fbcon: radeondrmfb (fb0) is primary device
usb 1-2: new high-speed USB device number 3 using ehci-pci
Console: switching to colour frame buffer device 170x48
radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
radeon 0000:01:05.0: registered panic notifier
[drm] Initialized radeon 2.36.0 20080528 for 0000:01:05.0 on minor 0
ata6: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-2: New USB device found, idVendor=0bda, idProduct=8171
usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2: Product: 11n USB Adapter
usb 1-2: Manufacturer: Manufacturer Realtek
usb 1-2: SerialNumber: 00e04c000001
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata5.00: ATAPI: HL-DT-ST BD-RE BH14NS40, 1.00, max UDMA/100
ata3.00: ATA-8: ST1000DM003-9YN162, CC4C, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133
ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata5.00: configured for UDMA/100
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: ATA-8: ST500LM012 HN-M500MBB, 2AR10001, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access ATA ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 1:0:0:0: [sdb] 4096-byte physical blocks
sd 1:0:0:0: [sdb] Write Protect is off
sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST1000DM003-9YN1 CC4C PQ: 0 ANSI: 5
sd 2:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
sd 2:0:0:0: [sdc] 4096-byte physical blocks
sd 2:0:0:0: Attached scsi generic sg2 type 0
sda: sda1 sda2 sda3
sd 2:0:0:0: [sdc] Write Protect is off
sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: p3 size 3291846656 extends beyond EOD, enabling native capacity
scsi 4:0:0:0: CD-ROM HL-DT-ST BD-RE BH14NS40 1.00 PQ: 0 ANSI: 5
sda: sda1 sda2 sda3
sda: p3 size 3291846656 extends beyond EOD, truncated
sr0: scsi3-mmc drive: 47x/94x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: [sda] Attached SCSI disk
sr 4:0:0:0: Attached scsi generic sg3 type 5
sdc: sdc1 sdc2
sd 2:0:0:0: [sdc] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 3113.980 MHz
firewire_core 0000:03:05.0: created device fw0: GUID db0700e39b078a2e, S400
usb 1-5: new high-speed USB device number 5 using ehci-pci
usb 1-5: New USB device found, idVendor=058f, idProduct=6366
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Mass Storage Device
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 058F63666471
usb-storage 1-1:1.0: USB Mass Storage device detected
usb-storage 1-1:1.0: Quirks match for vid 054c pid 02a5: 80000
scsi8 : usb-storage 1-1:1.0
usb-storage 1-5:1.0: USB Mass Storage device detected
scsi9 : usb-storage 1-5:1.0
usbcore: registered new interface driver usb-storage
sdb: sdb1
sd 1:0:0:0: [sdb] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: New USB device found, idVendor=0bc2, idProduct=3320
usb 2-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 2-1: Product: Expansion Desk
usb 2-1: Manufacturer: Seagate
usb 2-1: SerialNumber: NA4MDN7W
usb-storage 2-1:1.0: USB Mass Storage device detected
scsi10 : usb-storage 2-1:1.0
bio: create slab at 1
random: nonblocking pool is initialized
Switched to clocksource tsc
usb 4-1: new full-speed USB device number 2 using ohci-pci
usb 4-1: New USB device found, idVendor=0e8f, idProduct=0016
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: USB Hub
usb 4-1: Manufacturer: GASIA Semi.
hub 4-1:1.0: USB hub found
hub 4-1:1.0: 4 ports detected
scsi 9:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
usb 5-2: new full-speed USB device number 2 using ohci-pci
scsi 10:0:0:0: Direct-Access Seagate Expansion Desk 0711 PQ: 0 ANSI: 6
usb 5-2: New USB device found, idVendor=1130, idProduct=f211
usb 5-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 5-2: Product: USB AUDIO
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB AUDIO as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.3/input/input5
hid-generic 0003:1130:F211.0001: input,hidraw0: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:13.0-2/input3
input: USB AUDIO as /devices/pci0000:00/0000:00:13.0/usb5/5-2/5-2:1.4/input/input6
hid-generic 0003:1130:F211.0002: input,hidraw1: USB HID v1.10 Device [USB AUDIO ] on usb-0000:00:13.0-2/input4
scsi 8:0:0:0: Direct-Access Sony Storage Media 0100 PQ: 0 ANSI: 4
sd 8:0:0:0: Attached scsi generic sg4 type 0
sd 9:0:0:0: Attached scsi generic sg5 type 0
sd 10:0:0:0: Attached scsi generic sg6 type 0
sd 10:0:0:0: [sdf] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 8:0:0:0: [sdd] 15237120 512-byte logical blocks: (7.80 GB/7.26 GiB)
sd 8:0:0:0: [sdd] Write Protect is off
sd 8:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sde] Attached SCSI removable disk
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sdd: sdd1
sd 8:0:0:0: [sdd] No Caching mode page found
sd 8:0:0:0: [sdd] Assuming drive cache: write through
sd 8:0:0:0: [sdd] Attached SCSI removable disk
usb 4-1.1: new low-speed USB device number 3 using ohci-pci
usb 4-1.1: New USB device found, idVendor=046d, idProduct=c31d
usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.1: Product: USB Keyboard
usb 4-1.1: Manufacturer: Logitech
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1.1/4-1.1:1.0/input/input7
hid-generic 0003:046D:C31D.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:00:12.1-1.1/input0
input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1.1/4-1.1:1.1/input/input8
hid-generic 0003:046D:C31D.0004: input,hidraw3: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:00:12.1-1.1/input1
usb 4-1.4: new low-speed USB device number 4 using ohci-pci
usb 4-1.4: New USB device found, idVendor=046d, idProduct=c05a
usb 4-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1.4: Product: USB Optical Mouse
usb 4-1.4: Manufacturer: Logitech
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1.4/4-1.4:1.0/input/input9
hid-generic 0003:046D:C05A.0005: input,hidraw4: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:12.1-1.4/input0
sd 10:0:0:0: [sdf] Write Protect is off
sd 10:0:0:0: [sdf] Mode Sense: 4f 00 00 00
sd 10:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 10:0:0:0: [sdf] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sdf: sdf1
sd 10:0:0:0: [sdf] 732566645 4096-byte logical blocks: (3.00 TB/2.72 TiB)
sd 10:0:0:0: [sdf] Attached SCSI disk
squashfs: version 4.0 (2009/01/31) Phillip Lougher
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[1467]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:05: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
init: cups main process (1503) killed by HUP signal
init: cups main process ended, respawning
ATK0110 ATK0110:00: Overriding interface detection
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
MCE: In-kernel MCE decoding enabled.
lp0: using parport0 (interrupt-driven).
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SMRG 2 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SBRG.ASOC.SMRG 3 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
EDAC MC: Ver: 3.0.0
AMD64 EDAC driver v3.4.0
EDAC amd64: DRAM ECC disabled.
EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
sp5100_tco: PCI Revision ID: 0x3c
sp5100_tco: failed to find MMIO address, giving up.
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
device-mapper: multipath: version 1.6.0 loaded
r8712u: module is from the staging directory, the quality is unknown, you have been warned.
r8712u: Staging version
r8712u: register rtl8712_netdev_ops to netdev_ops
usb 1-2: r8712u: USB_SPEED_HIGH with 4 endpoints
usb 1-2: r8712u: Boot from EFUSE: Autoload OK
kvm: disabled by bios
usbmixer: volume control quirk for Tenx TP6911 Audio Headset
usbmixer: volume control quirk for Tenx TP6911 Audio Headset
usbcore: registered new interface driver snd-usb-audio
hda-intel 0000:00:14.2: Using LPIB position fix
hda-intel 0000:00:14.2: Enable sync_write for stable communication
kvm: disabled by bios
init: failsafe main process (1766) killed by TERM signal
kvm: disabled by bios
SKU: Nid=0x1d sku_cfg=0x4004c601
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000004
SKU: customization=0x000000c6
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x11/0x0
inputs:
Front Mic=0x19
Rear Mic=0x18
Line=0x1a
realtek: No valid SSID, checking pincfg 0x4004c601 for NID 0x1d
realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0887
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
input: HDA ATI SB Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
systemd-udevd[1511]: conflicting device node '/dev/mapper/pdc_ccaedadihj2' found, link to '/dev/dm-2' will not be created
systemd-udevd[1511]: conflicting device node '/dev/mapper/pdc_ccaedadihj3' found, link to '/dev/dm-3' will not be created
usb 1-2: r8712u: CustomerID = 0x0000
usb 1-2: r8712u: MAC Address from efuse = d8:eb:97:14:96:2d
usb 1-2: r8712u: Loading firmware from "rtlwifi/rtl8712u.bin"
usbcore: registered new interface driver r8712u
r8169 0000:02:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
cfg80211: Calling CRDA to update world regulatory domain
init: alsa-restore main process (2138) terminated with status 99
r8712u 1-2:1.0 wlan0: 1 RCR=0x153f00e
r8712u 1-2:1.0 wlan0: 2 RCR=0x553f00e
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2581) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
cdrom: sr0: dirty DVD+RW media, "finalizing"
UDF-fs: INFO Mounting volume 'UDF Volume', timestamp 2014/03/18 11:55 (1000)
systemd-hostnamed[4393]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
cdrom: sr0: dirty DVD+RW media, "finalizing"
UDF-fs: INFO Mounting volume 'UDF Volume', timestamp 2014/03/18 11:55 (1000)
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 16, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 16, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 2416, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 11104, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 60640, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 45904, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 6224, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 63568, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 37280, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 62400, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 17696, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 34944, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 36624, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 42608, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 14160, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 61856, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 64432, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 13344, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 32880, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 12960, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 15600, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 17648, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 8992, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 10432, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 16896, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 31328, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 3632, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 42608, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 47680, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 50992, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 19952, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 42480, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 56848, tid = 0
r8712u 1-2:1.0 wlan0: r8712_got_addbareq_event_callback: mac = 00:1d:d2:73:e5:90, seq = 59872, tid = 0
crafty[18812]: segfault at 0 ip 00007f562c122320 sp 00007fff27cf34a8 error 4 in libc-2.19.so[7f562c0b0000+1bc000]
crafty[18881]: segfault at 0 ip 00007f29bdd7a320 sp 00007fff350cb188 error 4 in libc-2.19.so[7f29bdd08000+1bc000]
crafty[18885]: segfault at 0 ip 00007fc784842320 sp 00007fff042cf188 error 4 in libc-2.19.so[7fc7847d0000+1bc000]